Accessories 



The SCREW-ON METAL BRACKET (M), to keep the wire rope away from the supports and limit fatigue on the wire rope between the arms, provides a smoother run for the pulleys. The SCREW-ON METAL BRACKET (M) is not a safety device and cannot replace the arms. It is therefore essential that they are only installed between the arms.


In some cases, the SCREW-ON METAL BRACKET (M) can be fixed onto a SCREW-ON METAL BRACKET INVERTER (G) depending on which way the continuous belay is installed around the support.


The BACK-STOP (W.1), combined with the SCREW-ON METAL BRACKET (M), blocks the KOALA EQUIPMENT POULIZ trolley on sloping activities such as stairs.


CONTINUOUS BELAY DEPARTING EXPLANATORY SIGN POST (W), combined with the SCREW-ON METAL BRACKET (M), to show users where to connect onto the continuous belay system at the start. The shape of the steel plate obliges the user to place the KOALA EQUIPMENT POULIZ trolley correctly.


The BACK-STOP FERRULE (W.2) blocks the KOALA EQUIPMENT POULIZ trolley on sloping activities such as stairs or horizontal activities such as nets.


The REMOVABLE FERRULE (V) allows the easy change of the new Y 2.0 SWAPPER (Y) without cutting the wire ropes.


The purpose of the CONNECTING FERRULE - 185 mm (7/8 in) TO BE CRIMPED (J) is to join 2 lifeline wire ropes, or a lifeline wire rope to a zip line wire rope. Both wire ropes must have identical diameters. It can be installed with Ø12 mm wire rope or Ø ½‘’ in depending on the materials you have chosen. Never install materials designed for Ø ½‘’ in wire rope on Ø12 mm wire rope or vice versa. Warning : The connections can only be made between 2 arms above a platform where the wire rope is slack. Only use those dies recommended by KOALA EQUIPMENT with a crimping tool exerting a force of at least 120 kN.


The purpose of the 65 mm (2.56 in) FERRULE TO BE CRIMPED (H) is to be swaged onto a wire rope, to put it under tension :
- horizontal activity : 1 FERRULE - 65 mm (2.5 in) TO BE CRIMPED (H) needed per arm.
- zipline : 3 or 5 FERRULES - 65 mm (2.5 in) TO BE CRIMPED (H) needed per arm.
Only use those dies recommended by KOALA EQUIPMENT with a crimping tool exerting a force of at least 120 kN. Before swaging, we recommend that you place a KOALA EQUIPMENT POULIZ trolley on the lifeline in order to ensure that there are no obstacles on the lifeline.


The objective of the FERRULE - 18 mm (0.7 in) TO BE CRIMPED (L) is to fix the wire rope onto the SCREW-ON METAL BRACKET (M). FERRULE - 18 mm (0.7 in) TO BE CRIMPED (L) for SCREW-ON METAL BRACKET (M) can never replace a FERRULE - 65 mm (2.5 in) TO BE CRIMPED (H), even if there are many of them.