ACCESSORIES

ACCESSORIES 



ACCESSORIES FOR CONTINUOUS BELAY SYSTEM

see products



POULIZ FOR CONTINUOUS BELAY SYSTEM

see products



SWAPPERS FOR CONTINUOUS BELAY SYSTEM

see products




SWITCH FOR CONTINUOUS BELAY SYSTEM

see products



ZIP BRAKES FOR CONTINUOUS BELAY SYSTEM

see products


  • 23,59 €
    AC060

    This bracket only use is keeping wire rope high enough, it is not a safety element.
    It must be used either for wire ropes at low height (on poles along paths, in stairs), or on wire rope in between the 2 arms of the same tree.
    Can be fixed on a wooden pole, a log protection or on metal strap (ref AC044AL) using a metal plate. 
    Weight: 200g / 0.5lb
    Price per item 
    Made in France Made in the French Alps

  • 18,19 €
    EQ13

    Pulley pocket
    Avoid material from dragging on the ground or hurting people
    Can easily be attached onto any harness , thanks to 2 press studs  
    There is a draining hole on each side for rainy days
    Could be use with all type of pulley
    weight: 89g
    size 26cm par 14 cm et 7cm wide


    Made in France Made in the French Alps.

  • 847,90 €
    ME09-1

    To allow users to choose between 2 different obstacles

    This switch can be set up on a metal strap around a tree with a clamp and 4 bolts (top on picture). Or it can be installed on a flat surfaced artificial support.
    Weight: 4,6kg 
    Price per item

    french flag Made in the French Alps 

  • 6,67 €
    ME10

    Ferrule to be swaged onto a wire rope, to put it under tension.

    Made for a 7x19 Ø12mm wire rope
    Arm for horizontal activity: 1 ferrule needed per arm
    Arm for zip line: 3 ferrules needed per arm
    Crimping must be done with a 120kN hydraulic crimping tool ref OU01KL or OU05KL equipped with a pair of dies ref OU02KL.
    Material: stainless steel 
    Weight: 60g / 0.09lb
    Price per item 
    french flag Made in the French Alp

  • 48,93 €
    ME103-F

    Continuous Belay departing explanatory sign post

    To be placed at the beginning of the continuous belay system. To be fixed with a screw on metal bracket. There is a draw to explain to the user how to position the Pulley. Enable the user to have the pulley the right position since the beginning.

    Weight: 750g (1.65 pounds)

    Size:  high =>255 mm (10.04 fts); large 90mm (3.54 fts)